| Features |
The M Series uses advanced “digital” modulation and signal processing techniques to achieve exceptionally high data throughput efficiency using traditional licensed narrow band radio channels. These products are available in many frequency band and regulatory formats, to suit spectrum bandplans in various continental regions. The range is designed for both fixed point to point (PTP), and multiple address (MAS) or point to multipoint (PMP) systems. |
| |
|
| Industries and applications |
The M Series products are widely used in point-topoint and point-to-multipoint (multiple access) applications for remote interconnection of PLCs, RTUs, dataloggers, and other data monitoring and control devices - including specialist utility devices (such as powerline ACRs). In addition, other applications such as area wide security and alarm systems, public information systems (traffic flow and public signage systems) and environmental monitoring systems. |
| |
|
| Scada systems |
This is where one or more centralised control sites are used to monitor and control remote field devices over wide areas. Examples include regional utilities monitoring and controlling networks over entire shires or a greater city metropolis. Industry sectors include energy utilities (gas and electricity distribution), water and sewerage utilities, catchment and environment groups (rivers, dams and catchment management authorities). |
| |
|
| Telemetry systems |
Dedicated telemetry control systems interconnecting sequential devices either where cabling is not practical or distances are considerable. Examples include:
• ore conveyor or slurry pipeline systems
• simple water systems (pump and reservoir interlinking)
• broadcast industry (linking studio to transmitter) etc. |
| |
|
| Information systems |
Public Information systems such as freeway vehicle flow, travel time monitoring, feedback signage, parking signage systems and meteorological stations etc. |
| |
|
Point-to-point and
point-to-multipoint |
Download our brochure for an overview of point-to-point and point-to-multipoint with M Series. |
| |
|
| Features and benefits |
Full list of features and benefits is found in our brochure.
• 395-520 MHz band operation
• 0.1 to 5 watt transmitter output power
• Software selectable Tx and Rx frequencies
• Simplex or half duplex operation with any Tx-Rx splits
• One model suitable for 12.5 and 25 kHz channel spacing
• Flash upgrade-able firmware – insurance against obsolescence.
• Remote over-the-air configuration of any radio from any location.
• Multistream™ simultaneous data streams allows for multiple vendor devices / protocols to be transported on the one radio network.
• Flexible data stream routing and steering providing optimum radio channel efficiency – complex data radio systems can be implemented with fewer radio channels.
• Multi-function radio capable of dropping off one stream to a port and forward on or repeat (store and forward) the same or other data.
• Stand-alone internal store and forward operation – buffered store and forward operation even in the ER remote units. |
